PDF Publication Title:
Text from PDF Page: 025
Diallyl Phthalate ADHESIVE SHEAR STRENGTH (MPa) (psi) Loctite® 380TM Black Max® Instant Adhesive, Rubber Toughened > 1950u > 13.5u > 3150u > 21.7u 150 1.0 > 1950u > 13.5u > 3150u > 21.7u > 1700u > 11.7u > 2350u > 16.2u > 1700u > 11.7u > 2350u > 16.2u > 1700u > 11.7u > 2900u > 20.0u > 2550u > 17.6u Loctite® 401TM Prism® Instant Adhesive, Surface Insensitive MEDICAL: Loctite® 4011TM Prism® Instant Adhesive, Surface Insensitive > 2900u > 20.0u Loctite® 401TM Prism® Loctite® 770TM Prism® Primer MEDICAL: Loctite® 4011TM Prism® / Loctite® 7701TM Prism® Primer 300 2.1 150 1.0 550 3.8 100 0.7 1050 7.2 Loctite® 414TM Super Bonder® Instant Adhesive, General Purpose > 2700u > 18.6u > 2700u > 18.6u > 3000u > 20.7u > 3000u > 20.7u > 2750u > 19.0u > 2750u > 19.0u Loctite® 330TM Depend® Adhesive, Two-Part No-Mix Acrylic 350 2.4 1400 9.7 650 4.5 2150 14.8 500 3.5 2300 15.9 Loctite® 3105TM Light Cure Adhesive, MEDICAL: Loctite® 3311TM Light Cure Adhesive 350 2.4 350 2.4 450 3.1 1450 10.0 300 2.1 1700 11.7 Loctite® 4307TM Flashcure® Light Cure Adhesive Loctite® H3000TM SpeedbonderTM Structural Adhesive, General Purpose Loctite® 3032TM Adhesive, Polyolefin Bonder Loctite® E-90FLTM Hysol® Epoxy Adhesive, Flexible Loctite® E-30CLTM Hysol® Epoxy Adhesive, Glass Bonder MEDICAL: Loctite® M-31CLTM Hysol® Epoxy Adhesive, Glass Bonder Loctite® E-214HPTM Hysol® Epoxy Adhesive, High Strength >2500 >17.2 1300 9.0 Adhesive Performance The four cyanoacrylates tested, namely Loctite® 401TM Prism®, 4011TM and 414TM Super Bonder®, 380TM Black Max® Instant Adhesives, and Loctite® 4307TM Flashcure® Light Cure Adhesive, created bonds which were stronger than the three grades of DAP evaluated. Most of the other adhesives evaluated showed fair to excellent bond strengths on DAP. There were not statistically significant differences between the bondability of the three grades of DAP evaluated. Surface Treatments The use of Loctite® 770TM Prism® Primer, in conjunction with Loctite® 401TM Prism® Instant Adhesive, or Loctite® 4011TM Prism® Medical Device Instant Adhesive with Loctite® 7701TM Prism® Primer, significantly lowered the bond strengths achieved on DAP. Surface roughening caused a statistically significant increase in bond strength when using Loctite® 330TM Depend® Adhesive and Loctite® 3105TM and 3311TM Light Cure Adhesives. The effect of surface roughening on the bond strengths achieved by cyanoacrylate adhesives could not be determined because both roughened and unroughened DAP bonded with cyanoacrylates resulted in substrate failure. Other Important Information • Allylic esters are compatible with all Loctite® brand adhesives, sealants, primers, and activators. • Surface cleaners: isopropyl alcohol, Loctite® ODC-Free Cleaner & Degreaser. 450 3.1 Loctite® H4500TM SpeedbonderTM Structural Adhesive, Metal Bonder 750 5.2 600 4.1 Loctite® E-00CLTM Hysol® Epoxy Adhesive, Low Odor 450 3.1 500 3.5 Loctite® E-20HPTM Hysol® Epoxy Adhesive, Fast Setting MEDICAL: Loctite® M-21HPTM Hysol® Epoxy Adhesive, Fast Setting 1150 7.9 650 4.5 Loctite® Fixmaster® High Performance Epoxy 500 3.5 Loctite® 1942TM Hysol® Hot Melt Adhesive, EVA Based NOTES: uThe force applied to the tests’ specimens exceeded the strength of the material, resulting in substrate failure before the actual bond strength achieved by the adhesive could be determined. The addition of the indicated additive (or surface roughening) caused a statistically significant decrease in the bond strength within 95% confidence limits. The addition of the indicated additive (or surface roughening) caused a statistically significant increase in the bond strength within 95% confidence limits. Loctite® 3631TM Hysol® Hot Melt Adhesive, Urethane Loctite® U-05FLTM Hysol® Urethane Adhesive, High Strength Loctite® Fixmaster® Rapid Rubber Repair 400 2.8 Loctite® 7804TM Hysol® Hot Melt Adhesive 100 0.7 950 6.6 950 6.6 400 2.8 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone 200 1.4 The Loctite® Design Guide for Bonding Plastics, Volume 6 23 RX3-1-525F-p-M Black courtesy of Byncolit N.A. 11 rms DAP courtesy of Rogers Corporation gRAde Rx3-1-525f Short Glass Fiber Reinforced Flame Retardant Black Coloring, 18 rms gRAde Rx3-1-525f RoUghened 28 rms gRAde Rx1310 Short glass Fiber Reinforced, Green Coloring, 16 rms gRAde Rx1310 RoUghened 27 rms gRAde Rx1-510n Mineral Filled Blue Coloring, 14 rms gRAde Rx1-510n RoUghened 24 rmsPDF Image | Design Guide for Bonding Plastics Volume 6 LT-2197
PDF Search Title:
Design Guide for Bonding Plastics Volume 6 LT-2197Original File Name Searched:
henkel-loctite-design-guide-plastic-bonding.pdfDIY PDF Search: Google It | Yahoo | Bing
Development of a solar powered Electric Ship The Electricship website originally started off as a project to develop a comprehensive renewable, affordable, modular electric ship... More Info
Modular Boat Hull Composite The case for a unsinkable, modular composite hybrid boat hull... More Info
MS Burgenstock Hybrid Electric Catamaran Lake Lucerne Unique shuttle servicing Lucerne to the Burgenstock Resort... More Info
Ground Power Unit GPU Powered by Lithium Ion Batteries The goal of the Ground Power Unit is to provide a readily accessible, modular, ready-to-power solution for remote power... More Info
CONTACT TEL: 608-238-6001 Email: greg@electricship.com (Standard Web Page)